Drives for sliding gates

(67 products)
Posuvne

Choosing the Right Drive for a Sliding Gate

Electromechanical drives are the most common choice for sliding gates in residential and commercial properties. These drives are reliable, durable, and offer excellent value for money. Electromechanical drives are categorized by their power supply into AC (alternating current) and DC (direct current) motors, each with its own specific advantages and application areas.

Types of Electromechanical Drives:

1. Drives with AC Power Supply

AC drives use alternating current and are known for their stability and high torque. Thanks to the higher torque, they can effectively drive heavier gates, ensuring reliable operation even under demanding conditions.

  • Advantages: High torque, ideal for heavy and large gates, long lifespan.
  • Application: Suitable for commercial properties or gates with high weight where continuous and intensive operation is required.

2. Drives with DC Power Supply

DC drives use direct current, allowing them to operate efficiently with lower energy consumption and less heat generation. As a result, they can handle a higher number of opening and closing cycles, which is ideal for gates with high usage frequency.

  • Advantages: Low energy consumption, less heat generation, ability to handle a higher number of cycles, quiet operation.
  • Application: Suitable for residential gates or gates with higher usage frequency, where efficient and quiet operation is needed.

What to Consider When Choosing a Drive for Sliding Gates

Choosing the right drive for your sliding gate depends on several key factors:

  • Type of Gate: It’s important to consider whether it’s a cantilever gate or a rolling gate. Cantilever gates require a more powerful drive since they must overcome their own weight without support, while rolling gates are usually less demanding on the drive.
  • Wing Weight: The drive must be strong enough to handle the weight of your gate. For heavier gates, AC drives are more suitable, offering higher torque.
  • Wing Length: Longer gates require a stronger motor and may need a drive with higher power to ensure smooth movement.
  • Usage Intensity: If the gate is used frequently, such as in commercial or residential complexes, DC drives can be advantageous due to their lower heat generation and ability to handle a higher number of cycles.
  • Location of the Gate: Consider whether the gate is on flat ground or on a slope. Gates installed on a slope require a more powerful drive that can overcome gravitational resistance during opening or closing.

Take Advantage of Our Product Filtering System

On our website, you will find a wide range of drives for sliding gates. To find the right drive for your gate, we recommend using our clear filtering system. With the filters, you can easily select a drive based on the type of power supply, performance, wing weight, and other parameters. If you need further assistance with your selection, don’t hesitate to contact us.


  • Braking device for gate module 4 BSFM-12

    Mark
    Rollkit
    Module of the gear comb
    mod 4
    771,90 zł
    without VAT
    949,44 zł with VAT
    In stock (98 units)
    PCS
  • Sliding gate drive KEY set, max 800kg TURBO-S-800

    Mark
    Key
    Max. wing length
    7m
    Module of the gear comb
    mod 4
    1.228,33 zł
    without VAT
    1.510,85 zł with VAT
    In stock (54 units)
    PCS
    Part of set
    Control unit for sliding gate 24V
    Sold out

    Control unit for sliding gate 24V CT-10324

    1 pcs

    Transmitter rolling code, 4CH, 433,92MHz SUB-44R

    2 pcs
    Mark
    Key
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage do 30m FT-23

    1 pcs
    Mark
    Key
    Power supply
    12-24V AC/DC
    Protection level
    IP54
  • Full NICE system for sliding gates max 400kg ROAD-400

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    Required products
    1.039,93 zł
    without VAT
    1.279,11 zł with VAT
    In stock (363 units)
    PCS
    Required products
    Part of set
    Sets

    Gate actuators set, max 400kg ROAD400-ZKIT

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    Required products
    1.188,49 zł
    without VAT
    1.461,84 zł with VAT
    In stock (363 units)
    SET

    Aluminum wheeled sliding gate 6x2.045 m, with rectangular infill 20x100 Anthracite R7016, with drive - SET FG/S-RLG-R7016-GA-SET

    Material
    Stainless steel AISI 304/Aluminium
    Surface finish
    Textured powder coating
    Effect
    Antracit RAL7016
    Out of stock
    7.563,97 zł
    without VAT
    9.303,68 zł with VAT
    Backordered
    SET

    Steel gear rack Zn, 30x8mm, L1m, max 1200kg H/01Fe-30x8H

    Material
    Steel
    Surface finish
    Galvanized
    Weight of gate Gmax/Goptimal (kg)
    1200
    24,53 zł
    without VAT
    30,17 zł with VAT
    In stock (6149 units)
    PCS

    Gear rack lightweight PVC+Fe,light,27x20mm, L1m,ma H/01PVC-J

    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    300
    21,46 zł
    without VAT
    26,40 zł with VAT
    In stock (9525 units)
    SET

    Toothed steel rack PVC+Fe,27x20mm,L1m,max 700kg H/01PVC

    Material
    Steel/Nylon
    Surface finish
    PVC coated
    Weight of gate Gmax/Goptimal (kg)
    700
    27,62 zł
    without VAT
    33,97 zł with VAT
    In stock (1282 units)
    SET

    Rack PVC+Fe,27x18mm,L1m,max 700kg H/01PVC-UP

    Material
    Steel/Nylon
    Material
    Steel/Nylon
    Surface finish
    PVC coated
    31,84 zł
    without VAT
    39,16 zł with VAT
    In stock (1282 units)
    SET

    Flashing lamp with inbuilt BLUEBUS antenna 12V MLBT

    Mark
    Nice
    82,60 zł
    without VAT
    101,60 zł with VAT
    Low stock (9 units)
    PCS

    Control unit for ROAD400 RBA4R10

    1 pcs
    Mark
    Nice

    Double-channel remote controller NICE FLO2R rollin INTI2

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • Braking Device for Gate Module 4 BSFM-30

    Mark
    Rollkit
    Ordered on 09.10.2026
    1.136,27 zł
    without VAT
    1.397,61 zł with VAT
    Backordered
    PCS
  • Set of propulsion for sliding gate set, max 600kg RBS600BDKCE

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    1.828,72 zł
    without VAT
    2.249,33 zł with VAT
    In stock (92 units)
    PCS
    Part of set

    Nereverzný elektromechanický pohon RBS600

    1 pcs
    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4

    NICE MYGO four-channel remote control MYGO4

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    1 pcs
    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44

    LED flashlight with integrated antenna 12 - 24V ELDC

    1 pcs
    Mark
    Nice
  • Braking Device for Gate Module 4 BSFM-7

    Mark
    Rollkit
    687,13 zł
    without VAT
    845,17 zł with VAT
    In stock (129 units)
    PCS
  • Set of propulsion for sliding gate set, max 400kg RBS400BDKCE

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    1.492,59 zł
    without VAT
    1.835,89 zł with VAT
    In stock (295 units)
    PCS
    Part of set

    Nereverzný elektromechanický pohon RBS400

    1 pcs
    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4

    NICE MYGO four-channel remote control MYGO4

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage - BLUEBUS do 30m EPMB

    1 pcs
    Mark
    Nice
    Power supply
    BlueBus
    Protection level
    IP44

    LED flashlight with integrated antenna 12 - 24V ELDC

    1 pcs
    Mark
    Nice
  • Sliding gate drive KEY set, max 600kg TURBO-S-600

    Mark
    Key
    Max. wing length
    6m
    Module of the gear comb
    mod 4
    1.061,94 zł
    without VAT
    1.306,19 zł with VAT
    In stock (22 units)
    PCS
    Part of set
    Control unit for sliding gate 24V
    Sold out

    Control unit for sliding gate 24V CT-10324

    1 pcs

    Transmitter rolling code, 4CH, 433,92MHz SUB-44R

    2 pcs
    Mark
    Key
    Frequency (MHz)
    433
    Code type
    Rolling

    Photocell for plaster montage do 30m FT-23

    1 pcs
    Mark
    Key
    Power supply
    12-24V AC/DC
    Protection level
    IP54
  • Universal stand for sliding gate drives UNI-STAND

    Material
    Stainless steel AISI 304
    Mark
    Rollkit
    166,98 zł
    without VAT
    205,39 zł with VAT
    In stock (288 units)
    PCS
  • NICE automation for sliding gates, set, max 1500kg THOR1500-ZKIT

    Mark
    Nice
    Max. wing length
    14m
    Module of the gear comb
    mod 4
    1.660,25 zł
    without VAT
    2.042,11 zł with VAT
    In stock (59 units)
    SET
    Part of set

    NICE automation max 1500kg THOR-1500

    1 pcs
    Mark
    Nice
    Max. wing length
    14m
    Module of the gear comb
    mod 4

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44
  • NICE gate actuator max 600kg ROBO-600

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    1.135,35 zł
    without VAT
    1.396,48 zł with VAT
    In stock (655 units)
    PCS
    Part of set
    Sets

    NICE gate actuator max 600kg ROBO-600-ZKIT

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    1.283,91 zł
    without VAT
    1.579,21 zł with VAT
    In stock (655 units)
    SET

    Control unit for ROX-600 ROA41

    1 pcs
    Mark
    Nice
    Drive slowdown
    Drive decelerate before endpoint
    Frequency (MHz)
    433

    Remote control NICE ONE ERA 2 channels rolling cod ON-2E

    2 pcs
    Mark
    Nice
    Frequency (MHz)
    433
    Code type
    Rolling
  • NICE gate actuator max 600kg ROBO-600-ZKIT

    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4
    1.283,91 zł
    without VAT
    1.579,21 zł with VAT
    In stock (655 units)
    SET
    Part of set

    NICE gate actuator max 600kg ROBO-600

    1 pcs
    Mark
    Nice
    Max. wing length
    8m
    Module of the gear comb
    mod 4

    Photocell for plaster montage - do 30m EPM

    1 pcs
    Mark
    Nice
    Power supply
    12-24V AC/DC
    Protection level
    IP44